Heating of the workplace or warehouse. Factors affecting it

As soon as the temperature starts to drop, the question arises for all of us, how to heat our production premises? It's not just to warm up, but to do it as efficiently as possible with the least expenditure of effort and money.

First of all, you need to decide which coolant you will work with? That is, what exactly will you heat the room with. Of course, there are many options, but we will focus on the main ones:

The first of the most popular coolants is Water:

Water heating is extremely widespread in our country and, in principle, throughout the world, as it is the cheapest in production and operation.

What should you pay attention to? Namely: on the temperature of the water, whether it will be sufficient to reach the required temperature and on the power of the pump. Will he be able to supply the required amount of water to the system for the same heating.

The second most popular heat carrier is electric current. Electric heating in itself is not difficult to install. It is the easiest to carry out on any territory and in any building. It is not inferior in effectiveness to water.

What should you pay attention to? The most important thing is that electric heating needs these phases! You should always remember this. You also need to understand the maximum air temperature delta, unlike water in electric tanks, even finned ones (such as we use), it is there, and it is no more than 45 degrees, in extreme cases 60 degrees. There is also a problem here issues with the selection of automation and its functions, but that is a separate and complex topic.

The third coolant will be steam. Steam heating will be one of the most efficient, but not the cheapest, in terms of production, installation and maintenance. Of course, you should take into account the temperature of the steam and the pressure of the steam, whether it will be sufficient for you for the correct and desired temperature level.

Also, it is not uncommon to find a heating system in which Antifreeze or oil is poured. This type of heating is mainly used in factories and plants. Small and medium-sized businesses rarely use it.

Taper is the most interesting! The building in which your room is located and it itself. From here there are more questions. With correct calculation and consideration of all factors, it is possible to save up to 50, and in some cases, more percent of space heating costs.

The first thing you need is to know the size of the room (width, height and length). Let's not forget that we are heating the volume of the room.

You also need to understand the purpose of the room, which is: a warehouse, a workshop, a painting chamber, a drying room, a cowshed, a garage, a greenhouse, or an office space.

The construction of the building: how insulated the building is, the quality of the walls, roof, and windows. The presence of holes for understanding heat loss.

Premises also have different accessibility, and here you should take into account the banal opening of the gate and air circulation, and whether you have a thermal curtain at the entrance.

Forgiving the room also plays its role, because you need to understand where it is best to place the heating points and how many of them are needed.

Air also plays a key role, namely:

is it supplied, does it have recirculation or does it need additional air heating? What exactly is your air volume and do you have supply ventilation?

Also take into account the necessary air temperature that you need, because maintaining the temperature in the room at the level of +5 and +25 requires a different amount of power, and therefore resources to achieve it.

As you have already seen, there are a lot of factors that must be taken into account when choosing a heating system. Go to our website and call, we will be happy to help you calculate and select a water, electric or steam heating system for your premises with maximum efficiency at reasonable costs!